CNC Machine
Edge banding machine
Panel saw
Band saw
Multi-blade rip saw
Other saw
Planer & thicknesser
Double side planer
Four side moulder
Wide belt sander
Disc & belt sander
Dust collector
Tenoner & mortiser
Woodworking drill
Vacuum membrane press
Miller & shaper
Wood lathe
Log splitter
Knife grinder
Power feeder
Combination machine
Hot & cold press
Painting machine
Other wood-machine

CNC Machine tool
Precision bench lathe
Milling & drilling
Multi-function machine
Band saw
Shearer and bender
Press machine

Power machine & tool
Hand tool
Pump
Air compressor
Motor & Generator
Other machine & tool

 

Model No.	WCQ35	WCQ45
Maximum turning diameter (mm)	Ф350	Ф450
Maximum machining diameter (mm)	Ф300	Ф300
Maximum processing length (mm)	280	300
X-axis travel (mm)	350	150+10
Z-axis travel (mm)	300	325
Rapid displacement of x-axis (m/min)	24	24
Z-axis rapid displacement (m/min)	30	30
Positioning accuracy (mm)	±0.004	±0.004
Repeat positioning accuracy (mm)	±0.002	±0.002
Spindle through hole (mm)	Ф56	Ф56
Maximum diameter of bar (mm)	Ф35	Ф35
Spindle End Specifications	A2-5	A2-5
Spindle maximum speed (rpm)	5500	5000
Chuck Specifications	Back collet	6"
Spindle (kw)	5.5	7.5
x-axis (Nm)	6	6
z-axis (Nm)	6	8.34
Tool holder form	45°T-Row Kinfe	30°Servo Turret
Boring cutter diameter (mm)	Ф25	Φ32
Square knife diameter (mm)	¨20	Φ25
tailstock form	Non	Servo（OPT）/Hydraulic（OPT）
Conical hole form	Non	MT-4
Overall weight (KG)	2220	2500
Length(mm)	1950	2100
Width(mm)	1650（water tank）	1650（water tank）
	2000（Chip box）	2000（Chip box）
Height(mm)	1670

 

Model No.	WCQ50	WCQ55
Maximum turning diameter (mm)	Ф450	Ф550
Maximum machining diameter (mm)	Ф300	Ф380
Maximum processing length (mm)	300	330
X-axis travel (mm)	150+25	190+10
Z-axis travel (mm)	325	350
Rapid displacement of x-axis (m/min)	24	30
Z-axis rapid displacement (m/min)	30	36
Positioning accuracy (mm)	±0.004	±0.004
Repeat positioning accuracy (mm)	±0.002	±0.002
Spindle through hole (mm)	Ф62	Ф62
Maximum diameter of bar (mm)	Ф51	Ф51
Spindle End Specifications	A2-6	A2-6
Spindle maximum speed (rpm)	4000	4000
Chuck Specifications	8"	8"
Spindle (kw)	7.5	11
x-axis (Nm)	8.34	8.34
z-axis (Nm)	11	11
Tool holder form	30°Servo Turret	30°Servo Turret
Boring cutter diameter (mm)	Ф40	Ф40
Square knife diameter (mm)	¨25	¨25
tailstock form	Servo（OPT）/ Hydraulic（OPT）	Servo（OPT） Hydraulic（OPT）
Conical hole form	MT-4	MT-4
Overall weight (KG)	2500	3650
Length(mm)	2100	2020
Width(mm)	1650（water tank）	1800（water tank）
	2000（Chip box）	2000（Chip box）
Height(mm)	1670	1785

Main features:
High precision
High rigidity
High efficiency

Introduction:

①The Z-direction guide rail is installed horizontally, and the 4 sliders can evenly distribute the weight of the saddle and the cutting force, reduce the ball wear of the slider, and prolong the service life of the guide rail.

②The slanted bed with high and low flat guide rails is in a consistent state during processing, assembly and use, which can effectively ensure the accuracy of the machine tool.

③Equipped with synchronous Motor & Generatorized spindle, high and low speed can output large torque, small vibration, low noise, fast dynamic response, stable operation, can effectively ensure the surface finish.

④The integrated planning and overall design of the truss manipulator and the machine tool make the machine tool more compact, more beautiful, and more efficient to realize automatic processing. Each mark has reserved truss automation interfaces (columns, protection, electrical) for subsequent modification of truss automation for customers. Provide convenience.